SALE
Ford F150, F250, F350 backup camera & 4.3" Mirror
SKU: FECC-43
Ford F150, F250, F350 backup camera - OE fit, includes 4.3" LCD & emblem camera
OEM factory emblem camera for Ford F-Series truck
F150, F250, F350 backup camera with Night Vision Technology and Parking Guidance Lines
OEM Ford Bezel, replaces factory tailgate emblem
This will fit any Ford with the large blue oval in the center of the tailgate (2005 and up).
Kit includes:
Factory OEM Tailgate Emblem & Camera Mount
CCD night vision camera pre-mounted
22 Foot Male to Male RCA Video Cable with reverse power output trigger wire
OEM Grade 4.3-inch Rearview Mirror Monitor with 2-Way Video-In, with 1 Video auto-trigger switching for back-up camera
VSM-A mount is attached to mirror
Mirror measures 10-1/4 inch
Factory Ford tailgate nameplate/camera mountFactory Ford blue oval emblem
Camera with night vision technology and selectable distance lines
OEM Ford mounting bolts
Detailed installation instructions
Camera Specifications:
Factory Style Custom Ford Camera (CMOS III)
Super CMOS Sensor with Night Vision Technology
22 Foot Male to Male RCA Video Cable with reverse power output trigger wire
Mirror Image
Selectable Parking Guidance Line
Engineered ABS Housing
Resolution (TV LINES): 580
Minimum illumination: <0.1Lux
Angle: 170°
Working Voltage: 9-16V
Operating Temp: -22-+176°F
Water-proof: IP67-IP68
Video System: NTSC (Color)
This kit allows you to see what is directly behind the truck - it will even see the rear bumper and hitch.
Installation Information:
Your factory tailgate blue oval is held on with two sided tape, use a heat gun and fishing line to work the old emblem off the surface of the tailgate. On older models you will need to drill an access hole for the camera to pass through the surface of the tailgate. On the bottom of the tailgate there is a square water drain that can be used to pass camera harness through. Most 2006 and newer models may already have the required holes so no drilling would be required in this case.
The wire harness has a single point weather resistant connection that connects to the camera near the spare tire under the truck - allows for easy tailgate removal! The camera harness is 22' long so all connections can be made inside the cab.
